Induction Furnace Design ppts

Searching:
Download
Induction Furnace Design - Fast Download

Download Induction Furnace Design from our fatest mirror

Design and Construction of an Induction Furnace (Cooling System)

9792 dl's @ 9560 KB/s

ppt
Design and Construction of an Induction Furnace (Cooling System)

Design and Construction of an Induction Furnace (Cooling System) Presented By Mg Thant Zin Win Roll No: Ph.D-M-7 2nd Seminar 16.6.2004

http://www.freewebs.com/thantzinwin/2nd%20Seminar.ppt

Date added: July 28, 2012 - Views: 84

ppt
Design and Construction of an Induction Furnace (Cooling System)

Design and Construction of an Induction Furnace (Cooling System) Presented By MG THANT ZIN WIN Roll No: Ph.D-M-7 5th Seminar 7.7.2004

http://www.freewebs.com/thantzinwin/5th%20Seminar.ppt

Date added: November 27, 2012 - Views: 23

ppt
Slide 1

Presentation Outlines Introduction Operating Principle of Coreless Induction Furnace Important Role of Water Cooling ... Role of Water Cooling Types of Water Cooling System Cooling Pond System Layout Description of 0.16 ton Coreless Induction Furnace Design Parameters of Cooling Pond ...

http://thantzinwin.webs.com/ME004.ppt

Date added: April 21, 2014 - Views: 4

ppt
PowerPoint Presentation

Silica-lined Coreless Induction Furnace Co-Authors Mr. David C. Williams Allied Mineral Products (Presenter) ... With conventional lining design, the Zinc will reach the coil grout and copper coils, even though the copper coils are water-cooled.

http://www.aomevents.com/conferences/afi/papers/1530%20Williams.pps

Date added: October 22, 2011 - Views: 107

ppt
VLSI Digital Systems Design - Courses | Course Web Pages

VLSI Digital Systems Design CMOS Processing Si Purification Chemical purification of Si Zone refined Induction furnace Si ingot melted in localized zone Molten zone moved from one end to the other Impurities more soluble in melt than in solid Impurities swept to one end of ingot Pure Si ...

http://classes.soe.ucsc.edu/cmpe222/Spring03/cmpe222_03process_ppt.ppt

Date added: December 13, 2011 - Views: 19

ppt
Casting II - University of Toledo College of Engineering

... Induction Furnace Melting Furnaces Cupola A vertical cylindrical furnace used for melting cast iron Melting Furnaces Crucible furnace Melts metal without direct contact with a burning fuel mixture Melting Furnaces Induction furnace Uses an alternating magnetic field to heat the metal Design ...

http://www.eng.utoledo.edu/mime/faculty_staff/faculty/imarinescu/2650/MProcesses_Notes_11.ppt

Date added: January 27, 2012 - Views: 36

ppt
MANUFACTURING - Southern Polytechnic State University

Product Design Considerations Dimensional Tolerances and Surface Finish: Significant differences in ... and aluminum alloys are common applications in foundry work Induction Furnace Figure 11.20 Induction furnace Ladles Last slide of students’ presentations Moving molten metal ...

http://fac-web.spsu.edu/met/snasseri/ch11-Metal-Casting-2.pps

Date added: September 6, 2012 - Views: 70

ppt
PowerPoint Presentation

The coreless induction furnace is used more frequently and consists of a water-cooled ... Arial Wingdings Helvetica Times Times New Roman Default Design 1_Default Design 2_Default Design 3_Default Design PowerPoint Presentation Chapter 25 PowerPoint Presentation PowerPoint ...

http://www.atperesources.com/MET_Resources/PPT/MET25.pps

Date added: July 5, 2013 - Views: 22

ppt
Company Profile - ISD Hardware

500kg Induction Furnace. 1. ARL 2460 Optical Emission Spectrometer For Materials Analysis. 1. Apron Type Shot Blasting Machines. 3. ... International hardware sources & design co., ltd. Author: ISD Hardware Co., Ltd. Created Date: 05/17/2005 20:59:37 Title:

http://isd-hardware.com/ISD-Hardware-Profile.ppsx

Date added: March 6, 2014 - Views: 3

ppt
Technology of basalt fibers production - ISTC

and Design Institute of Construction ... 3-tank with charge, 4-batch box, 5-pneumatic transport for charge, 6-induction furnace, 7-high frequency facility, 8-feeder, 9-stream feeder, 10-draw plate feeder, 11-lubricators, 12-winding mechanism.

http://www.istc.ru/istc/website.nsf/05b2ba8c40c916e6c32566a500331dd8/0de4fd26113af311c3256c6d003f2433/$FILE/NIIPstroitelstva.ppt

Date added: August 1, 2013 - Views: 11

ppt
Energy Efficiency Guide for Industry in Asia!

An induction furnace is shaped similar to a cylindrical ladle surrounded by an induction coil. ... Looking over the furnace design can improve the efficiency thanks to uniform heating and easier control of heat input.

http://www.energyefficiencyasia.org/docs/tools/training_materials/energy_equipment/Industry_sectors.ppt

Date added: September 19, 2011 - Views: 165

ppt
PowerPoint Presentation

* UNDP/GEF- Project (Steel) Direct Reduction Iron Units (DRI) – 420 Units Induction Furnace ... 20-25% Regenerative burner system High Efficiency Recuperator with improved furnace design Hot charging of Continuous Cast Billet Change of lump coal to coal producer gas as fuel Top-and-Bottom ...

http://www.ciiafricaconclave.com/images/role_of_energy.ppt

Date added: May 19, 2012 - Views: 51

ppt
Indian Institute of Foundry Coimbatore - Energy - S Ashok ...

Times New Roman Arial Default Design Energy Intake by the industry Energy Efficiency Benefits Energy usage Break-up in Foundry ... Slide 4 Energy Balance in Induction Furnace Foundry furnace savings aspects Radiation losses in foundry Thermal Efficiency parameters of ...

http://energymeasuretosave.com/yahoo_site_admin/assets/docs/Ashok_at_Indian_Institute_of_Foundry_cbe_May_2K9.101180927.ppt

Date added: October 31, 2011 - Views: 42

ppt
No Slide Title

This electrode design is recommended as a means of overcoming the electrode tip sticking ... occur In many instances the copper matte or electrolytic refined copper is mixed with other alloying elements in an induction furnace and poured into continuous cast ingots or bars which are further ...

http://www-gateway.vpr.drexel.edu/files/instructional_Technology/weld702/files/6g%20Copper.ppt

Date added: August 19, 2013 - Views: 9

ppt
Chapter 11 METAL CASTING PROCESSES - Industrial Engineering ...

Product Design Considerations. ISE 316 - Manufacturing Processes Engineering . ... Figure 11.20 ‑ Induction furnace. ISE 316 - Manufacturing Processes Engineering . Ladles. Moving molten metal from melting furnace to mold is sometimes done using crucibles .

http://www.ise.ncsu.edu/wysk/courses/ISE316/ISE316-Course-presentation/Chapter%2011.pptx

Date added: December 6, 2011 - Views: 224

ppt
PowerPoint Presentation

Higher Flame temperature No change in furnace design and materials Possibility of variable ... Improved Production Better heat transfer Reduction in Pollutants RAYCON SYSTEMS Used to heat fresh patch up lining in Induction Furnace with the help of High Velocity Burners Reduced the ...

http://www.encon.co.in/images/presentation-steel.pps

Date added: May 27, 2013 - Views: 9

ppt
International Conference Indian Steel Industry: Challenges ...

... ~ 23% Electric Induction Furnace (EIF): ~ 32% Induction Furnace Play dominant role in steel production in India-a unique feature. ... Increased R&D investment development of design & engineering capabilities necessary to support long term growth in the steel sector.

http://steelfurnaceindia.com/pdf/Mr.A.C.R.Das-Ministry-of-Steel.ppt

Date added: June 28, 2012 - Views: 56

ppt
Disa and Wheelabrator - Foundry Conclave

With current technologies, chances of fire in a Induction Furnace Fume Extraction system is negligible. ... Safe and Robust Design . Space-saving, flat design. Good. access. and. visibility. to. the. crucible. and. furnace. spout. 01/03/2013. Air pollution control in .

http://www.foundryconclave.com/pdf/DISA-Solutions-For-Furnace-Fume-Extraction-CBE-Conclave-2013.pptx

Date added: May 18, 2013 - Views: 15

ppt
REACTION KINETICS OF NANO SiC AND PRODUCTION OF SiC NANOWIRES ...

Mixture sintered in induction furnace Time 2 minutes Nitrogen atmosphere Input power 6.65 kW Temperature ~1200 °C ... Times New Roman Symbol Wingdings Default Design Microsoft Equation 3.0 MathType 4.0 Equation Microsoft Excel Chart PRODUCTION OF SILICON CARBIDE NANOWIRES BY INDUCTION ...

http://www.nanoscience.tcu.edu/files/PreDissertation%20Kendra%20Wallis.ppt

Date added: November 8, 2011 - Views: 27

ppt
WP Presentation

... Induction furnace, Static tube furnaces, Fluidized Bed furnace, Equipment for the ... Arial Wingdings Times New Roman Calibri Default Design 1_Default Design 2_Default Design 3_Default Design 4_Default Design 5_Default Design 6_Default Design 7_Default Design 8_Default Design ...

http://www.coolcoverings.org/doc/ppt_35.ppt

Date added: November 7, 2013 - Views: 3

ppt
VIPP2A.ppt - Home Page | MSU Department of Physics and Astronomy

... field theory-- Applications of electromagnetic induction self-inductance in an AC circuit Applications of electromagnetic induction the electric generator The design principle — how it ... Coal furnace Nuclear reactor Hydroelectric dam Applications of electromagnetic ...

http://www.pa.msu.edu/~stump/VIPP2008/VIPP2A.ppt

Date added: November 14, 2011 - Views: 52

ppt
Selling an Idea or a Product - Engineering Information Center

... Figure 13-17 Schematic showing the basic principle of a coreless induction furnace. Induction ... but not passage of molten metal Design feature affects mold life Difference in section size through mold Removal castings immediately after solidification Permanent Mold Casting Low ...

http://web.eng.fiu.edu/shenq/Spring%202012/EIN%203390/EIN%203390%20Chap%2013%20Multiple-Use-Mold%20Cast%20Spring_2012%20final.ppt

Date added: May 3, 2013 - Views: 14

ppt
introducing RAVI RESOURCE - ..:: Infinity Engineering ::..

Design / Development. Tools. Dies / Pattern. Process Optimization. Jigs / Fixture/ Gauges. New Parts. Packaging / Delivery. MPPC. AMM. Energy Manager. GM Technical. Chief Executive: Msc Mechanical. ... Induction furnace inductotherm India = 300kg/batch/hr .

http://www.infinityengg.com/Infinity%20Engg%202014.ppsx

Date added: April 28, 2014 - Views: 4

ppt
PowerPoint 簡報 - 歡迎來到MyOOPS開放式課程介面

2.008 Metal Casting Advantages of Lost Foam Casting No parting line No cores One-piece flask Freedom of design Minimum handling of sand Ease of cleaning and secondary operation Semi-solid Casting Punch Die Induction furnace Advantages of Semi-solid Casting Casting Process Comparison Process ...

http://www.myoops.org/cocw/mit/NR/rdonlyres/Mechanical-Engineering/2-008Spring2004/71B9F9C0-A40E-42C9-9B84-381045B3194E/0/19casting.ppt

Date added: November 28, 2011 - Views: 50

ppt
LED panel lamps for neon bulbs - Energy Measure to Save

Longer operating life (more than 1,00,000 hours) It is recommended to install LEDs for panel at design stage Lighting loss ... 0.8 Resistance welding Arc welding Induction furnace Welding 0.15 - 0.85 unloaded to full loaded Induction motor 1.00 0.5 ...

http://www.energymeasuretosave.com/yahoo_site_admin/assets/docs/Ashok_Lighting_at_Instn_of_Enggrs_Thoothukudi_March_2K9.101182100.ppt

Date added: November 21, 2012 - Views: 33

ppt
30.ppt - UL-Lafayette Computing Support Services

... Shear strength of brazed joints can reach 800Mpa Good/Poor Designs Soldering Different types of soldering Torch Furnace Iron Induction Resistance ... Arial Times New Roman Arial Narrow Comic Sans MS Default Design Bitmap Image PowerPoint Presentation Brazing Filler Metals ...

http://www.ucs.louisiana.edu/~snd7483/MCHE365/30.ppt

Date added: August 23, 2011 - Views: 96

ppt
TERI Template - Environment Compliance Assistance Center ...

... Commissioning of the demonstration plant Present technology status Cupola Poor furnace design Poor operating practices Non-uniform size of charge material PCS Variety of PCS designs Short life/high ... Cupola < 3 tph > 3 tph Particulate Particulate 450 150 Induction furnaces ...

http://www.ecacwb.org/editor_upload/files/Enironment-Kolkata-24.8.12.ppt

Date added: May 3, 2013 - Views: 8

ppt
TROUBLESHOOTING CRACKS IN STEEL CASTINGS - SFSA

... section and dark oxidized region on open crack face HOT CRACK LINED WITH OXIDATION PRODUCTS Hot Crack Causes Casting design feature such as small ... H< 2ppm Induction furnace can have high H > 6ppm AOD has least H< 1ppm Eliminate all sources of moisture in refractories, alloys, mold ...

http://www.sfsa.org/misc/duncan/duncan.ppt

Date added: September 24, 2011 - Views: 60

ppt
Slide 1

30-32% of the crude steel production is contributed by induction furnace (IF) units which ... Times New Roman Arial Calibri Arial Narrow Wingdings Soaring design template 1_Soaring design template 2_Soaring design template 3_Soaring design template 4_Soaring design template 5 ...

http://steelfurnaceindia.com/pdf/Mr.R.K.Sharma-FIMI.ppt

Date added: February 19, 2013 - Views: 19

ppt
www3.nd.edu/~manufact/MET_Powerpoint_files/Ch32.ppt

Brazed and Soldered Parts Furnace Brazing Joint Designs used in Brazing Typical Filler Metals for Brazing Various Metals and Alloys Effect of Joint Clearance on Strength of Brazed Joints Induction-Brazing Good and Poor Brazing Design Solder Types and Applications Wave-Soldering ...

http://www3.nd.edu/~manufact/MET_Powerpoint_files/Ch32.ppt

Date added: November 26, 2013 - Views: 5

ppt
PowerPoint Presentation

John Wilkinson of England obtained a Patent on cupola furnace in the ... contd By using improved design of furnaces and equipment – cupola height, divided blast, furnace lining, use of recuperators, exhaust system, dust catcher, Employing induction furnace for melting Employing ...

http://www.ecacwb.org/editor_upload/files/WBPCB%20GL%20Datta.ppt

Date added: May 2, 2013 - Views: 9

ppt
Chapter 31 Soldering, Brazing, and Braze Welding

... Torch (TB) Furnace Induction Dip TORCH SOLDERING AND TORCH BRAZING ... Presentation Soldering Alloys Tin-lead Brazing Alloys Copper-zinc Copper-zinc and Copper-phosphorus A5.8 Joint Design PowerPoint Presentation Building up Surfaces and Filling Holes PowerPoint ...

http://spot.pcc.edu/welding/PPT/Soldering%20&%20TB.ppt

Date added: November 10, 2013 - Views: 1

ppt
PowerPoint-Präsentation - AUTOMATIX ENGINEERING

Electrical design PLC Software Visualization Project ... of ePLAN 5.70 on ePLAN P8 Becker Automatisierungstechnik BMW ePLAN P8 Revision of circuit diagrams of an induction furnace for Daimler ABP Induction GmbH S7 S7-Graph WinCC flexibel Transline PLC programming and visualisation of a ...

http://www.automatix-engineering.de/ueber%20uns/Praesentation%20AUTOMATIX%20ENGINEERING%20LTD..pps

Date added: January 17, 2014 - Views: 7

ppt
No Slide Title

... pattern making Punch Die Induction furnace Sand casting ... Formation Formation of Dendrites Constitutional Supercooling Green Sand Casting Green Sand Mold Pattern Design Considerations (DFM) Typical Shrinkage Allowance Typical Pattern Machining Allowance Gating System ...

http://bdml.stanford.edu/twiki/pub/Brunelleschi/BronzeCasting/MITcasting2.ppt

Date added: November 1, 2011 - Views: 91

ppt
US Experience: Cement Kilns - Commission for Environmental ...

... and eddy technology Use high-temperature advanced furnaces Reverberatory furnace Rotary and tilting rotary furnace Induction furnace Shaft furnace How are air emissions reduced? ... Arial Tahoma Default Design Overview: ...

http://www.cec.org/smoc/leon2008/Sources/Presentations/18%20April/07-%20Anne%20Pope%20&%20Sarah%20Ternan/Secondary%20Aluminum%20Overview-e.ppt

Date added: October 11, 2011 - Views: 34

ppt
Aucun titre de diapositive - Foundry Conclave

* Summary of Operating tips in Induction melting furnace Dos Don’ts Keep the size of Charging material to about one ... Times New Roman Wingdings Arial Narrow 宋体 Verdana MS Pゴシック Modèle par défaut 1_Custom Design Custom Design Template 20100127 - BV ...

http://www.foundryconclave.com/pdf/Viswanathan.ppt

Date added: May 31, 2013 - Views: 16

ppt
Tower Products Presentation, Aster Teleservices Private Limited

Towers / Poles / Self Supported Masts / Guyed Masts Design and Production Capabilities of Aster Teleservices Private ... Stamping machines Notch cutting machines Angle bending machines Angle cropping with stamping Radial drilling machines Induction furnace for heating bend portion ...

http://www.atspl.com/publish/Aster_Tower_Presentation_V6.ppt

Date added: May 2, 2013 - Views: 15

ppt
Introduction to MHD and its application to fusion blankets

At the beginning of the code design, ... MHD generators (1923) MHD flow meters (1935) Metallurgy (induction furnace and casting of Al and Fe) Dispersion (granulation) of metals Ship propulsion Crystal growth MHD flow control (reduction of turbulent drag) ...

http://www.fusion.ucla.edu/abdou/abdou%20presentations/2007/India/Lecture4-MHDandThermofluids-1-3-07.ppt

Date added: August 19, 2011 - Views: 56

ppt
Soldering, Brazing and Braze Welding - Wikispaces

Furnace. Induction. Dip. Resistance. Torch Soldering and Brazing. Oxyfuel or air-fuel torches. Acetylene is the most often used but is not as preferable when compared to other fuel gases. ... Joint Design. Spacing between the parts being joined affects tensile strength.

http://cfleshner.wikispaces.com/file/view/Soldering%2C+Brazing+and+Braze+Welding.pptx

Date added: May 2, 2013 - Views: 38

ppt
Text Book: - University of Louisiana at Lafayette

... urethane is molded over metal dies a cured with amine vapor The mold is partially immersed into molten metal held in an induction furnace The metal is melted ... Arial Arial Narrow Times New Roman Verdana Comic Sans MS Default Design Bitmap Image PowerPoint Presentation Metal ...

http://www.ucs.louisiana.edu/~snd7483/MCHE365/11%5b1%5d.2.ppt

Date added: October 31, 2011 - Views: 71

ppt
Slide 1

... Ultraviolet Resistive Office Equipment UPS Battery Charger Medical Elevator Induction Furnace (w/ Thyristor) Welder Miscellaneous ... Note about Item 4 - Alternator Design: Alternator reactance influences instantaneous voltage dip; ...

http://www.holtcat.com/Portals/0/PSD/Break%20Out%20SpecSizer%20(S.%20Baker%20-%20June%202012).ppt

Date added: June 16, 2013 - Views: 12

ppt
Folie 1

The vacuum tight design enables quantitative enthalpy and Cp (Specific Heat) determination under cleanest atmospheres as well as under vacuum 10E-5mbar. ... The special induction furnace enables heating and cooling speeds in excess of 400°C/s.

http://www.ankersmid.com/download_file.aspx?filename=922_Total%20Thermo%20Progr.%20engl.ppt&typedownload=documentation

Date added: March 19, 2014 - Views: 4

ppt
PowerPoint Presentation

Induction hardening frequencies are usually 1000 Hz or ... This rarely happens unless the furnace is out ... Arial Wingdings Helvetica Times Times New Roman Default Design 1_Default Design 2_Default Design 3_Default Design PowerPoint Presentation Chapter 14 PowerPoint ...

http://www.atperesources.com/MET_Resources/PPT/MET14.pps

Date added: May 3, 2013 - Views: 83

ppt
No Slide Title

Department of Metallurgy Indian Institute of Science UGC Centre for Advanced Study Joint Facilities SEM with a FE tip (DST – FIST) High resolution TEM (Institute facility) Nanoindenter (DRDO Project) 30 KW Induction furnace Cold isostatic press High stiffness electromechanical testing system ...

http://materials.iisc.ernet.in/~www/archives/ataglance/dept2006june.ppt

Date added: August 4, 2013 - Views: 4

ppt
Multiphysics: Technology Overview & Applications

Applications (Primarily acoustics): Loudspeaker design Microphone Sonar / ultrasonics Acoustics Example Topics Covered Product Roadmap - Overview Roadmap ... Fluid coupling Example A.C. Induction furnace: ...

http://assets.fea.ru/uploads/ansys/pdf/ansys/ANSYS_Multiphysics_8_0_customer_3.ppt

Date added: August 1, 2013 - Views: 29

ppt
控制電纜燒損事故之分析、 改善與預防對策

中正--電力品質實驗室 For induction ... Can be minimized during the design stage Transients Harmonics are induced during cold-start or ... Motor Unbalanced model for Induction Motor Chapter outline Arc furnace harmonic sources Characteristics of Harmonics Generated by ...

http://www.calvin.edu/~pribeiro/IEEE/Tutorial-Harmonics-2007-PPT/Chapter%204-br.ppt

Date added: September 1, 2011 - Views: 63

ppt
Design for Manufacturability: - Introduction

Joint Design BUTT JOINT STRAP JOINT LAP JOINT FILLET JOINT CORNER JOINT Generalized Welding Symbol ... Torch brazing Dip brazing Furnace brazing Induction brazing Advantages & Disadvantages Advantages Dissimilar metals which canot be welded can be joined by brazing Very thin metals can be ...

http://mechanical.illinois.edu/media/uploads/course_websites/lecture_15_-_welding,_brazing,_and_soldering_-_chaps_30___31.20101021.4cc092daa3c187.69773447.ppt

Date added: February 12, 2013 - Views: 40

ppt
Slide 1 - IDEC, Ltd - IDEC | Consulting, Training, High ...

With induction furnaces scrap is cut into small ... When brasses or bronzes are melted, zinc is fumed from the furnace, ... Arial Times New Roman Tahoma Arial Unicode MS Wingdings Symbol Arial Black Default Design PowerPoint Presentation PowerPoint Presentation PowerPoint ...

http://idec.gr/etiv/pdfs/Modules/mod14/MODULE14.ppt

Date added: May 10, 2013 - Views: 4

ppt
Pyrolysis: Instrumentation and Application

Thermocouple or resistance thermometer used to indicate wall temperature Reference 2 Furnace Pyrolyzer Design http://www.sge.com/uploads/lh/_0 ... Electrical current induced onto a wire made of ferromagnetic metal by use of magnet or high frequency coil Continual induction of current wire ...

http://mtweb.mtsu.edu/nchong/Pyrolysis-Ben-6200.ppt

Date added: June 13, 2012 - Views: 31

ppt
Download - Sudisa | Home

... and most of all process flexibility that rapidly brings your next design to go-to-market production. ... Medium Frequency Induction Furnace. Make Of Furnace: Inductotherm. Production Facility. An ISO / TS 16949 : 2002 Certified Company.

http://www.sudisa.in/download/sudisa_foundry.ppsx

Date added: December 3, 2013 - Views: 7